Heat welding products, hot air blowers, Honda generators, & Honda pumps.

390 Portage Blvd., Kent, OHIO 44240
Our Address

405 B Milton Dr., Hewitt, TEXAS 76643
PH: 1-800-345-9353 FAX: 330-677-8282

BAK products

BAK ComOn

Features

Comparable to the LEISTER Astro.
Electronically regulated temperature adjustable 20 to 460 ° C.
Optimal price-performance relationship
High welding capacity, speed, and quality.
Field tested electronics, service friendly.
Maintenance-free servo drive motor.
Stepless adjustment of pressure, speed, and temperature.
Stable, lightweight and compact design.
Material welding range: PE-LD, PE-HD, PE-C, PVC-P, PP, ECB, EVA, TPO.

BAK Compact

Features

Comparable to the LEISTER Hotwind/Vulcan.
Variable temperature setting.
variable air-flow setting.
Main switch that can be locked separately for heating and fan.
Integrated on-board electronic tool protection.
Stainless steel protection tube.
Removable handle.

Optional Equipment

External controller for heat (analog or digital).
External activation of air-flow (analog or digital).
Analysis of motor speed.
Integrated thermocouple.
On-board digital controller.

The BAK Compact is completely portable for all-in-one heater / blower applications.

BAK Disamat 801

Features

Electronically regulated temperature adjustable 68 to 968 ° F.
Stepless adjustable airflow-volume.
Digital display of speed, temperature, and airflow.
Speed adjustable from 0.66 to 13.12 ft/min
Automatic start function.
Foldless welding, high weld speed.
Welds all kinds of thermoplastic roofing membranes
Welding parameters for different membranes can be stored in memory.

BAK ErOn

Features

Comparable to LEISTER Electron
Hot air blower for heating up, shrinking, bending, drying, sterilizing, activating, igniting, thawing and welding of plastics.
Ergonomic grip for differing applications.
Electronically regulated temperature adjustable 20 to 650 ° C.
Air flow adjustable to 500 l/min.
High heat efficiency.

BAK Extruders All Models

Features

All high tech extruders are built using the new "Flicker regulations"
Decisively less wear parts than other extruder brands.
Each extruders' main screw and cylinder barrel are made out of tempered steel.
Patented temperature measurement system by Dohle (Germany). The thermocouple is located inside the masss barrel on the outlet, guaranteeing a perfect temperature.
Cold start protection by mass and air temperature.
Set and actual temperature displayed at the same time.
Auto air types exceed the specified minimum air quantity of 300 l/min.
All types can be upgraded with a revolving head with integrated preheat nozzle to weld in any direction.
No wear parts on the rod feed system.
Lower weight due to the use of light weight materials.
Integrated thermo - blocker protects the drive machines.
Rotable handle.

BAK LarOn

Features

Comparable to the LEISTER Varimat.
Ideal weight distribution guarantees smooth welding.
Service friendly thanks to standard electronics.
Digital display for temperature & speed.
Automatic startup system.
Steady and building site friendly design to weld all thermoplastic roofing materials and membranes.
Robust, efficient & cost effective.

BAK MarOn

Features

Comparable to the LEISTER Diode.
Small light weight design; yet powerful, and flexible.
Steplessly adjustable temperature.
Adapter tube with heat protection.
Suitable for continuous use.
Push fit or screw on nozzle.
Ergonomic handle.
Air supply with blower type HD 140 or SorOn.

BAK MiOn

Features

Comparable to the LEISTER Twinny w/wedge only.
Electronically regulated temperature adjustable 20 to 500 ° C.
Small and light, but with very high welding performance.
Perfect for thin material and overhead welding.
Powerful drive system for low maintenance.
Patented high tech ceramic wedge.
Stepless adjustment of all welding parameters.
User friendly operation.
Material welding range: PE-LD, PE-HD, PE-C, PVC-P, PP, ECB, EVA, TPO.

BAK RiOn

Features

Comparable to LEISTER Triac, but with higher airflow.
Field tested.
Optimal performance/best price.
High speed welding enables high production.
Easy welding with ergonomic handle.
Maintenance friendly.
High quality.
Large range of accessories available.

BAK SorOn

Features

Comparable to the LEISTER Minor.
Longlife carbon brushes.
Replaceable air filter.
very small & compact design, but powerful.
Compact design.
For use as an external air supply.
Handy, quiet operation.

BAK TarpOn

Features

Comparable to the LEISTER Uniplan.
Electronically regulated temperature adjustable 20 to 650 ° C.
Stepless adjustable airflow-volume 50-100%
Digital display of speed, temperature, and airflow.
Speed adjustable from 0.5 to 12m/min
Automatic start function.
Foldless welding, high weld speed.

BAK Type HD140

Features

Comparable to the LEISTER Robust.
A stainless steel filter is standard at the intake connection .
Low noise level.
Maintenance free.
Compact design.
Completely oil free.

BAK Type HD240

Features

Comparable to the LEISTER Airpack.
A stainless steel filter is standard at the intake connection .
Low noise level.
Maintenance free.
Compact design.
Completely oil free.

BAK Type L62

Features

Comparable to the LEISTER Type 5000.
Different voltages, power and special versions, such as external activation via control or SPS available upon request.
Special accessories available upon request.

BAK Type M50/M50L

Features

Comparable to the LEISTER Type 3300.
Different voltages, power and special versions, such as external activation via control or SPS available upon request.
Special accessories available upon request.

BAK Type MD10

Features

Comparable to the LEISTER Silence.
A stainless steel filter is standard at the intake connection .
High performance and compact design.
Logical performance graduation.
Long service life with low operation costs.
High efficiency.
Favorable noise characteristics.
Robust and hydrodynamic housings.
Maintenance free.
Compact design.
Completely oil free.

BAK Type MD14

Features

Comparable to the LEISTER ASO.
A stainless steel filter is standard at the intake connection .
High performance and compact design.
Logical performance graduation.
Long service life with low operation costs.
High efficiency.
Favorable noise characteristics.
Robust and hydrodynamic housings.
Maintenance free.
Compact design.
Completely oil free.

BAK Type S21

Features

Comparable to the LEISTER Type 700.
Different voltages, power and special versions, such as external activation via control or SPS available upon request.
Special accessories available upon request.

BAK Type S32

Features

Comparable to the LEISTER 700-3000.
Different voltages, power and special versions, such as external activation via control or SPS available upon request.
Special accessories available upon request.

BAK Type S36

Features

Comparable to the LEISTER Type 3000.
Different voltages, power and special versions, such as external activation via control or SPS available upon request.
Special accessories available upon request.

BAK Type XL92

Features

Comparable to the LEISTER Type 10000.
Different voltages, power and special versions, such as external activation via control or SPS available upon request.
Special accessories available upon request.

BAK Type XS20

Features

Comparable to LEISTER Le Mini.
Housing made from stainless steel.
Connection made of chromed brass.
Length of the connection cable and thermocouple line 1.5m.
Air hose available per meter.
Other voltages available upon request.

The BAK Type XS20 is one of the World's smallest air heaters featuring an integrated temperature probe. The XS20 is designed for pin-point accuracy in various heat applications, especially for hot air riveting in the most confined of spaces.

BeltOn P

Features

Able to weld two seams in one easy operation.
Convenient automatic start function.
Digital display of temperature and speed.
Easy maintenance with standard components.
Superior quality and industrial grade construction.
Designed for the most demanding job sites.

BeltOn T

Features

Able to weld two seams in one easy operation.
Convenient automatic start function.
Digital display of temperature and speed.
Easy maintenance with standard components.
Superior quality and industrial grade construction.
Designed for the most demanding job sites.

FloorOn

Features

For welding thermoplastic floors and linoleum.
Digital display of speed, temperature and air flow.
Automatic drive start system.
Optical wall switch with backlash make sure the machine stops at the wall and the floor is not burned.
Integrated dereller system.

MarOn Connected to SorOn

Features

Temperature stepless adjustable.
Adapter tube with heat protection.
For push fit or screw on nozzle.
Air supply with blower type HD 140 or SorOn.
Connected with blower SorOn for external application.

Micro

Features

The smallest extruder in the world
Light weight, 5.07 lbs with a welding capacity of up to 1.10 lbs/h max, including control box, integrated compressor and 22.97 ft of supply hose. The lightest hand held extrusion welder on the market for PE, PP, PVDF, PVC and ECTFE
Special tracking nose feature
Patented temperature control located directly in the extrudate
Separate air and extrudate temperature controls that barely deviate from plan values
Adjustable capacity and start-stop functions directly on the extruder
Built-in protection against cold-start for air-supply and extrudate
Digital display of air and extrudate temperatures available in optional Centigrade or Fare height values
Internal air-supply that is built into the control box and an integral thermal barrier positioned between the body and the handle
Easy maintenance due to brushless drives for both extruder and internal air supply